-
Up close
-
Another angle
TPU post feet
On DiscordFits CantiLover Light V3
Flexible TPU feet the support posts drop into, with a flared sole that makes a loaded stand harder to tip backward. Printed as a left and right pair, in a 3.6 mm wall or a thinner 1.8 mm wall that uses less TPU.
TeamGraphika designed the base systems; we design and test the add-ons with his permission. Renders show the designs as modeled, not photos of prints.
Print details
- Print time
- about 25 min
- Filament
- about 11 g of TPU
- Plates
- 1
- Printed by us
- Passed a test print on August 23, 2026
- You also need
- TeamGraphika's CantiLover Light V3, from his Patreon.
Time and filament are the slicer's estimate on a Bambu Lab X1 Carbon with our project settings, not a stopwatch. Your printer and settings will differ.
How to get it
On Discord means the file is posted in TeamGraphika's Discord now. The Discord is for members: join TeamGraphika's Patreon, then the "Open the Discord post" link goes straight to it.
Print the base design from his files, then add ours. See every free community design.
New to the stand? Follow the CantiLover Light assembly guide, step by step with a picture of each step.
More CantiLover add-ons
- Clicker insert for BoxyKeys
- Pegboard top shelf
- MultiBuild pegboard tile
- MultiBuild pegboard carrier set
- MultiBuild pegboard, Jumbo 180
- MultiBuild pegboard, Jumbo 256
- MultiBuild pegboard, Jumbo 320
- Keycap display pegboards
- MultiBoard sign bracket
- MultiBoard to MultiBoard clip
- MultiBoard side-to-side clip
- CantiLover Spinner Insert Rail
- FullSpan 5 ball shelf
- Leg clip
- Lip seat clip
- Stand link
- Stand link, back to back
- Tall handle connector