Materials and Care
How Printed Layer 3D printed charms are made, how durable they are, and how to keep them looking great.
What we print in
Printed Layer currently prints on Bambu Lab X1C, P1S, and H2C machines and primarily uses Bambu Lab PLA for most orders.
Printed Layer products are printed in PLA, a plant-based 3D printing plastic commonly used for personalized accessories and decorative parts.
PLA is lightweight, sturdy for everyday bag use, and a practical material for made-to-order charms in many colors.
Need a precise color reference? Browse the Printed Layer filament color chart. On finished parts, perceived color can shift slightly with layer height, finish, and lighting.
Color options for charms and clicker fidgets
Every order is printed in Charlottesville, Virginia from a stocked filament library: 30 PLA Basic colors for charms and fidgets. This page explains what each product offers today and how to request a color that is not listed.
Stocked base colors by product
These are the base colors currently offered on each listing. They come straight from the same color data the product pages use, so this list stays in sync with the shop.
Base colors: jade white, red, black, and blue.
Want a different color? Message before ordering and we will confirm what filament is on hand.
Base colors: yellow, black, red, and jade white.
Want a different color? Message before ordering and we will confirm what filament is on hand.
Base colors: orange, black, and jade white.
Want black, white, or another team color? Message before ordering and we will confirm what filament is on hand.
Baseball and softball number charms take the number in Etsy's personalization box. There is no color picker on the listing.
Message your team color before ordering and we will confirm the closest filament.
How custom color requests work
1. Share the color
Send a color name, a team photo, or a hex code through Etsy messages or the contact page.
2. Confirm the match
We check it against the filament color chart and confirm the closest filament on hand before printing.
3. Order on Etsy
Place the order with your confirmed color noted at checkout. Roster orders can mix numbers and colors; see team orders.
Durability expectations
For normal daily use, charms hold up well through sports travel, errands, beach days, and regular bag handling.
Heat is the main thing to avoid. Extended exposure above about 140°F can soften PLA, so avoid leaving charms in a hot vehicle.
Care instructions
- Wipe with a damp cloth and mild soap.
- Avoid long soaks in chlorinated or salt water.
- Do not leave in a closed hot car.
- Store out of direct sun between trips when possible.
Safety guidance
PLA is a plant-based plastic widely used in consumer 3D printing.
Charms are small accessories and are not intended for children under 3 due to small-part risk.
Repair and replacement
If a charm breaks under normal use, send a photo and your Etsy order number through Contact so support options can be reviewed quickly.
FAQ
What printers do you use? +
Printed Layer currently prints on Bambu Lab X1C, P1S, and H2C machines.
What filament do you primarily use? +
Printed Layer primarily uses Bambu Lab PLA for most orders.
Will PLA melt in a hot car? +
PLA can soften at high temperatures, generally around 140°F and above. Avoid leaving charms in a closed hot car for long periods.
How long does a PLA charm last? +
With normal daily use, a PLA charm can last for years. They are designed for regular bag use, sports travel, and everyday handling.
Can 3D printed charms get wet? +
Yes. They are water resistant for normal use in rain and splashes. Avoid long soaks in chlorinated or salt water to preserve appearance over time.
Can I paint a 3D printed charm? +
Yes. Lightly sand, apply a plastic-friendly primer, and use acrylic paint for best adhesion.
Are these charms safe for very young children? +
Charms contain small parts and are not intended for children under 3. Adult supervision is recommended for younger children.
Which colors are stocked for each product? +
Each product page lists its current base colors. Clicker fidgets ship in a small set of stocked colors, and personalized number charms take the number in Etsy's personalization box, and you can message us before ordering with a color request.
Can I request a color that is not listed on a product page? +
Yes. Most designs can be printed in any of the 30 stocked PLA colors on the filament chart. Message before ordering so the closest filament on hand can be confirmed before anything is printed.
How do team color matches work? +
Send a color name, a photo, or a hex reference through Etsy messages or the contact page. We compare it against the filament chart and confirm the closest match before your order goes to print.
Will the printed color look exactly like the swatch on my screen? +
Printed colors can vary slightly by material batch, layer texture, and lighting, and screens render color differently. The swatches are a close reference, not an exact guarantee.
Related guides
Shop the collection
Every order is printed to order in Charlottesville, Virginia. Checkout is on Etsy, with buyer protection included.